化学合成类制药行业工艺废气VOCs排放特征与危害评估分析

以浙江台州6家典型化学合成类制药企业为代表,对其排放工艺废气中的18项挥发性有机物(VOCs)特征污染物(如甲苯、甲醛、二氯甲烷等)进行监测和分析,并采用臭氧产生潜力(OFP)和健康风险评价指标对VOCs所产生的环境与健康危害进行初步的评价.结果表明,化学合成类制药企业排放的总VOCs浓度为14.9~308.6 mg·m-3,其产生环境危害的OFP值为3.1~315.1 mg·m-3,主要贡献物质为甲苯、四氢呋喃、乙酸乙酯等6种物质,存在较大的潜在环境危害.另外,健康危害中的非致癌风险指数和总致癌风险指数介于9.48×10-7~4.98×10-4a-1和3.17×10-5~6.33×10-3之间,主要是苯、甲醛和二氯甲烷这3种致癌物.     

保护臭氧层谈判中的美欧博弈

臭氧层损耗是重要的全球环境问题之一。最早认识到臭氧层危害的美国率先在国内立法控制相关物质,然而另一大经济体——欧共体,在这一方面却行动迟缓。在保护臭氧层的国际谈判中,美欧之间相互妥协,最终达成了对氟氯烃化合物(CFCs)进行限控的《蒙特利尔议定书》。美欧之间的分歧来自国内化工业巨头的影响,国际经济变动影响外交决策。国际环境问题背后隐藏的经济关系与大国的领导作用是影响国际环境合作的主要因素。     

Watershed Regressions for Pesticides (warp) Models for Predicting Atrazine Concentrations in Corn Belt Streams1

Stone, Wesley W. and Robert J. Gilliom, 2012. Watershed Regressions for Pesticides (WARP) Models for Predicting Atrazine Concentrations in Corn Belt Streams. Journal of the American Water Resources Association (JAWRA) 48(5): 970‐986. DOI: 10.1111/j.1752‐1688.2012.00661.x Abstract: Watershed Regressions for Pesticides (WARP) models, previously developed for atrazine at the national scale, are improved for application to the United States (U.S.) Corn Belt region by developing region‐specific models that include watershed characteristics that are influential in predicting atrazine concentration statistics within the Corn Belt. WARP models for the Corn Belt (WARP‐CB) were developed for annual maximum moving‐average (14‐, 21‐, 30‐, 60‐, and 90‐day durations) and annual 95th‐percentile atrazine concentrations in streams of the Corn Belt region. The WARP‐CB models accounted for 53 to 62% of the variability in the various concentration statistics among the model‐development sites. Model predictions were within a factor of 5 of the observed concentration statistic for over 90% of the model‐development sites. The WARP‐CB residuals and uncertainty are lower than those of the National WARP model for the same sites. Although atrazine‐use intensity is the most important explanatory variable in the National WARP models, it is not a significant variable in the WARP‐CB models. The WARP‐CB models provide improved predictions for Corn Belt streams draining watersheds with atrazine‐use intensities of 17 kg/km² of watershed area or greater.     

Comparison of Stream Invertebrate Response Models for Bioassessment Metrics1

Waite, Ian R., Jonathan G. Kennen, Jason T. May, Larry R. Brown, Thomas F. Cuffney, Kimberly A. Jones, and James L. Orlando, 2012. Comparison of Stream Invertebrate Response Models for Bioassessment Metrics. Journal of the American Water Resources Association (JAWRA) 48(3): 570-583. DOI: 10.1111/j.1752-1688.2011.00632.x Abstract: We aggregated invertebrate data from various sources to assemble data for modeling in two ecoregions in Oregon and one in California. Our goal was to compare the performance of models developed using multiple linear regression (MLR) techniques with models developed using three relatively new techniques: classification and regression trees (CART), random forest (RF), and boosted regression trees (BRT). We used tolerance of taxa based on richness (RICHTOL) and ratio of observed to expected taxa (O/E) as response variables and land use/land cover as explanatory variables. Responses were generally linear; therefore, there was little improvement to the MLR models when compared to models using CART and RF. In general, the four modeling techniques (MLR, CART, RF, and BRT) consistently selected the same primary explanatory variables for each region. However, results from the BRT models showed significant improvement over the MLR models for each region; increases in R² from 0.09 to 0.20. The O/E metric that was derived from models specifically calibrated for Oregon consistently had lower R² values than RICHTOL for the two regions tested. Modeled O/E R² values were between 0.06 and 0.10 lower for each of the four modeling methods applied in the Willamette Valley and were between 0.19 and 0.36 points lower for the Blue Mountains. As a result, BRT models may indeed represent a good alternative to MLR for modeling species distribution relative to environmental variables.     

Modeling urban films using a dynamic multimedia fugacity model

A thin film coats impervious urban surfaces that can act as a source or sink of organic pollutants to the greater environment. We review recent developments in the understanding of film and film-associated pollutant behavior and incorporate them into an unsteady-state version of the fugacity based Multimedia Urban Model (MUM), focusing on detailed considerations of surface film dynamics. The model is used to explore the conditions under which these atmospherically-derived films act as a temporary source of chemicals to the air and/or storm water. Assuming film growth of 2.1 nm d⁻¹ (Wu et al., 2008a), PCB congeners 28 and 180 reach air-film equilibrium within hours and days, respectively. The model results suggest that the film acts as a temporary sink of chemicals from air during dry and cool weather, as a source to air in warmer weather, and as a source to storm water and soil during rain events. Using the downtown area of the City of Toronto Canada, as a case study, the model estimates that nearly 1 g d⁻¹ of ∑₅PCBs are transferred from air to film to storm water.     

清浊分流条件下的混凝-臭氧处理棉针织印染清废水

根据污染源头控制和废水回用的要求,对典型棉针织染整厂的不同生产过程废水排水水质特征进行了统计分析,提出了较实用的废水源头清浊分流方案。在此基础上重点研究了混凝-臭氧组合工艺对清废水处理效果,确定了最优的工艺条件。结果表明,清废水主要为洗水,占废水总量的25%～30%;混凝-臭氧组合工艺的最优工艺条件为：pH为6～9,PAC投加量为48 mg/L,PAM投加量为1.0 mg/L,臭氧接触时间为12 min（臭氧浓度为14.5 mg/L）,这时,清废水COD、色度去除率分别为71%和98%,实践证明,出水水质完全能够满足染整生产。     

我国典型南方城市臭氧污染特征

分析了我国典型南方城市的臭氧污染特征,选取我国4个有代表性的南方重点城市武汉、宁波、中山和南宁的2013—2015年监测数据,使用EXCEL、ORIGIN和MATLAB等统计软件开展研究,结果表明:我国南方典型城市的臭氧质量浓度分布有明显时间变化特征,超标时间跨度大,部分南方城市与氮氧化物存在较明显负相关性,相关系数高于-0.6;受城市所在不同地理位置、气象因素、大气扩散条件及可能的不同本地排放污染源构成等因素影响,4个城市的近3年臭氧浓度月均值、超标情况和年内峰值均存在一定差异和分组相似性;与部分气象因素也表现出显著相关性。     

气象因子对臭氧的影响及其在空气质量预报中的应用

为提高重庆市臭氧(O_3)预报准确率,利用2013—2015年5—10月O_3监测数据和气象数据,通过主成分分析、逐步回归分析等方法,确定了影响重庆O_3浓度的主要气象因素为最高温度、温差、太阳辐射、降水量、相对湿度、水气压和压差;通过基于O_3污染水平相似的主要气象控制因子筛选和最优组合的预报结果优化方法,提高了O_3预报准确率,使2016年5—8月O_3的AQI类别预报准确率由57.7%增至72.4%,O_3超标的预报准确率由38%增至46%。     

Critical Steps for Continuing Advancement of Satellite Rainfall Applications for Surface Hydrology in the Nile River Basin1

Gebremichael, Mekonnen, Emmanouil N. Anagnostou, and Menberu M. Bitew, 2010. Critical Steps for Continuing Advancement of Satellite Rainfall Applications for Surface Hydrology in the Nile River Basin. Journal of the American Water Resources Association (JAWRA) 46(2):361-366. DOI: 10.1111/j.1752-1688.2010.00428.x. Abstract: Given the increasingly higher resolution and data accessibility, satellite precipitation products could be useful for hydrological application in the Nile River Basin, which is characterized by lack of reasonably dense hydrological in situ sensors and lack of access to the existing dataset. However, in the absence of both extreme caution and research results for the Nile basin, the satellite rainfall (SR) products may not be used, or may even be used erroneously. We identify two steps that are critical to enhance the value of SR products for hydrological applications in the Nile basin. The first step is to establish representative validation sites in the Nile basin. The validation site will help to quantify the errors in the different kinds of SR products, which will be used to select the best products for the Nile basin, include the errors in decision making, and design strategies to minimize the errors. Using rainfall measurements collected from the unprecedented high-density rain gauge network over a small region within the Nile basin, we indicate that SR estimates could be subject to significant errors, and quantification of estimation errors by way of establishing validation sites is critically important in order to use the SR products. The second step is to identify the degree of hydrologic model complexity required to obtain more accurate hydrologic simulation results for the Nile basin when using SR products as input. The level of model complexity may depend on basin size and SR algorithm, and further research is needed to spell out this dependence for the Nile basin.     

工厂三维建模及其事故模拟

利用Microstation软件对某化工厂区进行三维建模,在考虑实际外界风向、风速,不同点火源位置等重要影响因素的条件下,运用计算流体动力学(CFD)软件FLACS,研究了有毒、易燃易爆的氯乙烯液化气体储罐安全阀气体泄漏和储罐底部物料管线液态氯乙烯的泄漏、蒸发、扩散和爆炸作用等过程,计算结果可以给出氯乙烯火灾、爆炸或扩散中毒等事故后果的影响范围和相关精确物理量。模拟结果表明,对于常温下的氯乙烯液化气体球罐,球罐安全阀泄漏后罐区及周边不会有燃烧或爆炸危险;而物料管线在特定的液相泄漏情景下,蒸发扩散的氯乙烯气云则有可能发生气云爆炸;但在弱约束条件下,爆炸冲击波作用比较微弱。该研究方法及其结果可以为石油化工企业选址、设计布局、安全规划、风险分析、应急救援及事故调查等提供更加准确的依据。